פרטים נוספים
SMART AMP | 4 CHANNELS | 120 WATTS PER CHANNEL
The CONNECTSERIES 124 is a 4-channel amplifier with 120 watts per channel in a ½ rack space form factor. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 124 features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.
| Inputs |
Analog: 4 Balanced Inputs with user-selectable 26dB, 34dB, and mic level input sensitivity |
| |
4 unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity |
| |
Note: Unbalanced and RCA inputs share the same analog input channel |
| THD+N |
0.1% (20Hz to 20kHz) |
| Frequency Response |
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise Level |
102dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk |
70dB (20Hz to 20kHz) |
| Amplifier Output Classification |
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel |
| DSP |
DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| |
Input Matrix: Routable matrix; any input to any output with primary and secondary input priority |
| |
Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) |
| |
Parametric EQ: 8 Band Parametric EQ per channel |
| |
Output Delay: 100ms per channel |
| |
Output Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection |
| |
User Adjustable Limiting: Peak Voltage and RMS Voltage |
| |
Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources |
| Control, Monitoring, Networking |
User Interface: Web Browser User Interface, 3rd Party API control, Cloud control, or SharkWare |
| |
External I/O: External I/O In: Toggles Remote On/Off |
| |
External I/O Out: Indicates Amplifier Health |
| |
4 General Purpose input and output pins for general input triggering and output statuses - Coming Soon |
| Operation |
AC Mains: 100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| |
Power Supply: Universal Switch Mode Power Supply |
| Physical Specifications |
Dimensions (L x W x H): Product: 11.82” x 8.58” x 1.71" (300.11mm x 218mm x 43.5mm) |
| |
Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm) |
| |
Weight: 7lbs / 4.1kg |
| |
Cooling: Front to Rear Variable Fan Speed Cooling |
| |
Fan Noise at idle: 50dB @ 1m |
| |
Fan Noise at 50%: 57dB @ 1m |
| |
Fan Noise at full speed: 63dB @ 1m |