פרטים נוספים
ה- CONNECTSERIES 124D הוא מגבר חכם בעל 4 ערוצים עם 120 וואט לכל ערוץ, בגודל קומפקטי של חצי יחידת מתקן (½ rack). כחלק מסדרת Dante CONNECTSERIES, הוא כולל כניסות אנלוגיות וכניסות Dante, ומיועד להתקנות קטנות ובינוניות. המגבר תומך בבחירה בין HiZ (70V או 100V) או LoZ לכל ערוץ, כולל DSP מתקדם לשליטה מלאה על השמע.
תכונות עיקריות:
- 3 דרכי חיבור: Wi-Fi מובנה, חיבור לרשת Wi-Fi קיימת, או חיבור לרשת מקומית (Cat5/Cat6)
- ממשק מבוסס דפדפן – שליטה מכל מכשיר ללא צורך בהתקנת תוכנה
- שליטה ובקרה בענן – שליטה וניטור מרחוק ללא צורך ב-VPN
- תמיכה ב- Hi-Z & Lo-Z – בחירה בין 70V או 100V לכל ערוץ
- גשר כוח חכם – הכפלת ההספק בכל ערוץ בודד
- כניסות Dante וכניסות אנלוגיות – שילוב מקורות שמע גמיש
- DSP ב-96kHz – ניתוב מתקדם, EQ פרמטרי, קרוסאוברים ומגבלות רמקולים
- ספק כוח אוניברסלי – פעולה בטווח 100VAC – 240VAC
- חיבור I/O חיצוני – הפעלה/כיבוי מרחוק וניטור תקלות
- הגברת Class-D יעילה במיוחד – להפחתת צריכת זרם
🔗 רישום חינם לחשבון LEA Cloud: leaprofessional.cloud
SMART AMP | 4 CHANNELS | 120 WATTS PER CHANNEL
| INPUTS |
|
| Analog |
4 Balanced Inputs, selectable 26dB, 34dB, mic level input sensitivity |
| |
4 Unbalanced RCA inputs, selectable 26dB and 34dB input sensitivity |
| |
Note: Unbalanced and RCA inputs share the same analog input channel |
| Dante |
4 x 4 Dante at 48kHz, Multicast or Unicast |
| AES 67 |
Configurable via Dante Controller software |
| THD+N |
0.1% (20Hz to 20kHz) |
| Frequency Response |
20Hz to 20kHz, +/- 0.5dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise |
102dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk |
70dB (20Hz to 20kHz) |
| AMPLIFIER OUTPUT CLASSIFICATION |
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality |
| DSP |
|
| DSP Architecture |
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core and Sample Rate Converters |
| Input Matrix |
Routable matrix; any input to any output with primary and secondary input priority |
| Crossovers |
Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) |
| Parametric EQ |
8 Band Parametric EQ per channel |
| Output Delay |
100ms per channel |
| Output Protection |
DC, VHF, AC Mains Protection, Overtemp, Current Limiter, fan fault detection |
| User Adjustable Limiting |
Peak Voltage and RMS Voltage |
| Load Monitoring |
Realtime Load Monitoring, Pilot Tone Detection (internal or external) |
| CONTROL, MONITORING, NETWORKING |
|
| User Interface |
Web Browser Interface, 3rd Party API, Cloud Control, SharkWare |
| External I/O |
External Input: Toggles Remote On/Off |
| |
External Output: Indicates Amplifier Health |
| |
4 General Purpose Input/Output pins for triggering and output statuses (Coming Soon) |
| OPERATION |
|
| AC Mains |
100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| Power Supply |
Universal Switch Mode Power Supply |
| PHYSICAL SPEC |
|
| Dimensions (L x W x H) |
Product: 11.82” x 8.58” x 1.71” (300.11mm x 218mm x 43.5mm) |
| |
Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm) |
| Weight |
Product: 7lbs / 4.1kg; Shipping: Coming Soon |
| Cooling |
Front to Rear Variable Fan Speed Cooling |
| Fan Noise |
Idle: 50dB @ 1m; 50% Speed: 57dB @ 1m; Full Speed: 63dB @ 1m |