פרטים נוספים
ה- CONNECTSERIES 64D הוא מגבר חכם בעל 4 ערוצים עם 60 וואט לכל ערוץ, בגודל קומפקטי של חצי יחידת מתקן (½ rack). כחלק מסדרת Dante CONNECTSERIES, הוא כולל כניסות אנלוגיות וכניסות Dante, ומיועד להתקנות קטנות ובינוניות. המגבר תומך בבחירה בין HiZ (70V או 100V) או LoZ לכל ערוץ, כולל DSP מתקדם לשליטה מלאה על השמע.
תכונות עיקריות:
✔ 3 דרכי חיבור: Wi-Fi מובנה, חיבור לרשת Wi-Fi קיימת, או חיבור לרשת מקומית (Cat5/Cat6)
✔ ממשק מבוסס דפדפן – שליטה מכל מכשיר ללא צורך בהתקנת תוכנה
✔ שליטה ובקרה בענן – שליטה וניטור מרחוק ללא צורך ב-VPN
✔ תמיכה ב- Hi-Z & Lo-Z – בחירה בין 70V או 100V לכל ערוץ
✔ גשר כוח חכם – הכפלת ההספק בכל ערוץ בודד
✔ כניסות Dante וכניסות אנלוגיות – שילוב מקורות שמע גמיש
✔ DSP ב-96kHz – ניתוב מתקדם, EQ פרמטרי, קרוסאוברים ומגבלות רמקולים
✔ ספק כוח אוניברסלי – פעולה בטווח 100VAC – 240VAC
✔ חיבור I/O חיצוני – הפעלה/כיבוי מרחוק וניטור תקלות
✔ הגברת Class-D יעילה במיוחד – להפחתת צריכת זרם
🔗 רישום חינם לחשבון LEA Cloud: leaprofessional.cloud
SMART AMP | 4 CHANNELS | 60 WATTS PER CHANNEL
| Inputs |
Analog: 4 Balanced Inputs with user-selectable 26dB, 34dB, and mic level input sensitivity |
| |
4 unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity |
| |
***Note - Unbalanced and RCA inputs share the same analog input channel |
| |
Dante: 4 x 4 Dante at 48kHz, Multicast or Unicast |
| |
AES 67: Configurable via the Dante Controller software |
| THD+N |
0.1% (20Hz to 20kHz) |
| Frequency Response |
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal to Noise Level |
102dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk |
70dB (20Hz to 20kHz) |
| Amplifier Output Classification |
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality |
| |
without sacrificing an amplifier channel |
| DSP Architecture |
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| Input Matrix |
Routable matrix; any input to any output with primary and secondary input priority |
| Crossovers |
Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) |
| Parametric EQ |
8 Band Parametric EQ per channel |
| Output Delay |
100ms per channel |
| Output Protection |
DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection |
| User Adjustable Limiting |
Peak Voltage and RMS Voltage |
| Load Monitoring |
Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources |
| User Interface |
Web Browser User Interface, 3rd Party API control, Cloud control, or SharkWare |
| External I/O |
External I/O In: Toggles Remote On/Off |
| |
External I/O Out: Indicates Amplifier Health |
| |
4 General Purpose Input and Output pins for general input |
| |
Triggering and output statuses - Coming Soon |
| AC Mains |
100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| Power Supply |
Universal Switch Mode Power Supply |
| Dimensions (L x W x H) |
Product: 11.82” x 8.58” x 1.71" (300.11mm x 218mm x 43.5mm) |
| |
Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm) |
| Weight |
7lbs / 4.1kg |
| Cooling |
Front to Rear Variable Fan Speed Cooling |
| |
Fan Noise at idle is 50dB @ 1m |
| |
Fan Noise at 50% is 57dB @1m |
| |
Fan Noise at full speed is 63dB @ 1m |