פרטים נוספים
מגבר Class D עם 4x1500W DSP, בורר 70V/100V/Low-Z על כל ערוץ, חיבור לרשת Dante ושליטה מרחוק על גבי ענן
HIGH POWER SMART AMP | 4 CH | 1500 WATTS/CH
Introducing the CONNECT 1504 high-power IoT-enabled smart amp. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.
Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.
|
|
|
Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
|
|
|
|
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
|
|
105dB (20Hz to 20kHz referenced to 8Ω)
|
|
|
AMPLIFIER OUTPUT CLASSIFICATION
|
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
|
|
|
|
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
|
|
Routable matrix; any input to any output with primary and secondary input priority
|
|
Advanced DSP with Linear Phase Brickwall FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
|
|
8 Band Parametric EQ per channel
|
|
|
|
DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
|
|
Peak Voltage and RMS Voltage
|
|
Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
|
CONTROL, MONITORING, NETWORKING
|
|
|
Web Browser User Interface, 3rd Party API control, or CLOUD control
|
|
External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health
|
|
|
|
100VAC - 240VAC +/- 15% 50Hz or 60Hz
|
|
Universal Switch Mode Power Supply with Power Factor Correction
|
|
|
|
Product: 17.88” x 19” x 2U (362mm x 482mm x 2U) (362mm x 482mm x 2U) Shipping: TBD
|
|
26lbs / 11.8kg | Shipping: 30 lbs / 13.6 kg
|
|
Front to Rear Variable Fan Speed Cooling Fan Noise at idle is 50dB @ 1m Fan Noise at 50% is 57dB @1m Fan Noise at full speed is 63dB @ 1m
|